Intex Sand Filter 2800 Won't turn on

[Newerabs]

Hello,

I have an Intex sand filter/pump for my AGP. It's been working fine with no issues. I noticed tonight it wasn't running. I went out to look and the GFCI wasn't tripped. I checked and the outlet is working. The switch had been working with no issues before that. I'm not sure what else to try/test?

 

[cowboycasey]

I do not but see if something in this search will help

https://www.google.com/search?sa=X&tbm=vid&q=Intex+Sand+Filter+2800+troubleshooting&ved=2ahUKEwjWxo6yjqTyAhVXu54KHaWXAM0Q8ccDegQIDBAI&biw=1920&bih=923

 

[Newerabs]

I do not but see if something in this search will help

https://www.google.com/search?sa=X&tbm=vid&q=Intex+Sand+Filter+2800+troubleshooting&ved=2ahUKEwjWxo6yjqTyAhVXu54KHaWXAM0Q8ccDegQIDBAI&biw=1920&bih=923

Thank you. I did try a search before I got on the forum. Wasn't much help. I thought I'd just check and see if anyone else had experienced this problem.

I think it's a bad switch on the pump FWIW.

 

[cowboycasey]

It may be a while before someone comes on that has had that issue.. I just thought a bump would also help

 

[jeffchap]

Do you see any swelling or scorching on the GFCI? I had one that water leaked into and ruined it. I just cut it off and put on a regular plug, as the entire circuit was GFCI protected at the house.