Intelliflow VS - impeller issue or air leak

Pull it apart. See what the issue is.
As I was looking to undo the screws saw some gaps on the wet side and also corrosion.

Attached are the results.

Final result - shaft is broken

Seems water leaked over the season and ultimately froze in winters.
 

Attachments

  • IMG_4844.jpeg
    IMG_4844.jpeg
    555.8 KB · Views: 9
  • IMG_4843.jpeg
    IMG_4843.jpeg
    572.9 KB · Views: 9
  • IMG_4842.jpeg
    IMG_4842.jpeg
    443 KB · Views: 9
  • IMG_4838.jpeg
    IMG_4838.jpeg
    473.2 KB · Views: 9
I would never recommend the de-rated VS pump. You would have to run it at a higher rpm and thus more electrical expense.
 

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.