Intelliflo Not Responding to Intellicenter

[NotAnAd]

Not,

Check out this thread...

Pentair intellifloXF VSF pump lossing comm (replaced control) Repaired

I've been having this issue for 2 years that my pump would shut of randomly (lose RS485 comm) only way to restart was to power down and restart. I searched for a solution when it first happened 2 years ago and found nothing. I just put up with it as it only happened 2-3 times a summer. But...

www.troublefreepool.com

Thanks,

Jim R.

Don’t have time to wait around for Pentair to send someone to update firmware. Client wants everything now now now now.. Again , this is all brand new equipment + new pool, so it’s quite frustrating. All pentair has told me so far is that it’s 2 bad pump drives. They never mentioned firmware. I’ll check which firmware is on those pumps next time I’m there.

 

[NotAnAd]

An update on this.
I did a factory reset on both pumps and they are now working with Intellicenter!!
Weird.
I also checked the firmware of both IntellifloXF’s, they are 2.11.

Thank you for all your replies.

 

[TinFoilHat]

Oh, you have one of THOSE clients..... Thanks for the pool photo. It's definitely a cool pool.

 

[Jimrahbe]

Not,

Thanks for the feedback.. I have found that in most cases, doing a factory reset has not fixed many things in the past..

I will have to remember the next time we see an XF issue to recommend doing it..

Thanks again,

Jim R.

 

[Turbo1Ton]

An update on this.
I did a factory reset on both pumps and they are now working with Intellicenter!!
Weird.
I also checked the firmware of both IntellifloXF’s, they are 2.11.

Thank you for all your replies.

Glad you got it sorted. That is a really beautiful pool/view!

--Jeff