My Intellichlor is not producing chlorine. The green cell light is flashing. I've inspected the cell, manually acid cleaned it twice, sprayed with a hose and can find nothing wrong in the cell. Cell has used 60,000 of it's 10,000 hours (40% life left). In addition to this, my Intelliph acid dispenser is not automatically dispensing acid. I can manually pump the acid, but while the pump works, I'm not sure any acid is actually going into the cell and into the pool. I have 2 gallons of acid in the tank and am watching to see if it goes down but since last night I cannot tell if it has after I've manually done it a few times (which pumps 4 ounces each time). So my acid pump isn't dispensing automatically, and my cell isn't producing chlorine. My chlorine count was nill and my ph was at 8.0! I've manually added the acid several times to lower the ph and put a few gallons of bleach in to get some chlorine in the pool. Salt level is fine. What can I do to get my pump automatically working again, or is it waiting for the cell to work? I'm stumped. Can't seem to fix either issue. Help!