Intellicenter users -- what does your pump or pumps do when you go into service mode, or do a timeout from the panel?
My pump (VS) flips out of external communication mode, but then seems to be picking up some kind of automation program in the pump - so the pump keeps going.
You can hit start/stop on the pump to stop it. All the schedules are disabled on the pump. I would expect the pump to stop when comms are lost, not keep going doing its own thing.
Overall - all other Intellicenter communication works in general -- schedules, RPM's, etc.
Haven't called Pentair, but that will probably be next if someone elses' does something different.
Tony
My pump (VS) flips out of external communication mode, but then seems to be picking up some kind of automation program in the pump - so the pump keeps going.
You can hit start/stop on the pump to stop it. All the schedules are disabled on the pump. I would expect the pump to stop when comms are lost, not keep going doing its own thing.
Overall - all other Intellicenter communication works in general -- schedules, RPM's, etc.
Haven't called Pentair, but that will probably be next if someone elses' does something different.
Tony