Intellibrite - Only Red light comes on

[DougS]

Remodeled pool and installed Intellibrite 4 years ago. Controlled by EasyTouch. Spa and Pool lights are set to sync on Caribbean mode.

Only the red light comes on in the Pool, and it's somewhat dim compared with before. Spa is fine.

Should I replace the pool light? Or is it possibly a connection? Or maybe something with the controller?

 

[ajw22]

I suspect the light engine has failed. Consider replacing it with a Florida Sunseekers board.

Pentair LED Pool Lights - Further Reading

www.troublefreepool.com

 

[DougS]

Thanks Allen,

I have replaced the light engine. But sadly, Pentair only sells the full light housing, including the long power cable that you have to snake all the way back to the power source. For me that's 100' (part number 601002). What a waste of material and HUGE COST ($779.00) just to replace the bulb. I took the engine out of the new one, and replaced it into the old housing. Works great. I cannot believe that Pentair won't sell the engine separately.

I'll check out the Florida Sunseeker's board. Thanks for the tip.