Intelicenter mother board

[Nikodemario]

Hello I have a pentair intelicenter and wondering someone can help me order a mother board for it? I am wondering is someone can send me in the right direction on where to order and the part number if possible thanks

 

[Nikodemario]

Hello I need help identifying which mother board I need I have a pentair intelicenter

 

[Texas Splash]

Maybe @Jimrahbe can help?

 

[Jimrahbe]

Nik,

I am confused...

Why do you think you need a new mother board?

What problem are you trying to solve?

Thanks,

Jim R.

 

[Nikodemario]

So the display doesn’t work on the panel and it doesn’t want to connect to the pentair app/wifi however I’m am getting power to my actuators

 

[Jimrahbe]

Nik,

Is this just a camera flash or is there a hole in this relay?

Let's see if Jeff has any inputs... Calling @Turbo1Ton

Thanks,

Jim R.

 

[Nikodemario]

That relay is lit up from getting power I believe

 

[Turbo1Ton]

I'm guessing that is a reflection of an LED that is on the board, between those two relays.

Sounds exactly like what happened to mine. Actuators and everything were powered, but no display, and I had to run the pump from the pump controller. Fortunately for me, I was still under warranty and it got replaced that way.

I believe the only part number for the mother board, also includes a new faceplate, Pentair 523051. This is the board that has the expansion card slot, which you have the i8PS expansion card, so you need that. I don't believe there is an option to get it any other way. When the warranty guy replaced mine, he had the whole assembly, and removed the board portion and swapped it out.

Did you have any storms in your area recently? I'm pretty sure lightning is what took mine out.

--Jeff

 

[Jimrahbe]

I'm guessing that is a reflection of an LED that is on the board, between those two relays.

Jeff,

That makes much more sense.

Thanks for chiming in..

Jim R.

 

[ajw22]

What happened to the "mother board" in your IntelliCenter?

All of the personality cards plug into the i5P or i5X board.

 

[Nikodemario]

Hello I reciently replaced a mother board however I’m having issues programming and setting up the pool to run off of the Auxiliary’s

 

[ajw22]

What model automation system are we discussing?

 

[rstrouse]

That is IntelliCenter and you first need to update the firmware before you do anything else. You will need to do it in two steps until you get to 1.064.

 

[Nikodemario]

Where would the temp sensors plug into on the new mother board? Their is a option on the board however no pins to plug the connector into.

 

[ajw22]

@Turbo1Ton @MyAZPool @rstrouse Is this a defective board missing connectors J15 and J8?

 

[rstrouse]

No that is an i5x not an i5P

 

[rstrouse]

I guess I could be a little more clear. The i5x is the motherboard for use in an expansion panel. It is supposed to be connected to another board over RS485 for use as an expansion an cannot be used as the main controller.

 

[ajw22]

Ah, a i5X Expansion Board. Never seen one of those.

So the temperature sensors get connected on the main controller board.

 

[rstrouse]

Yes. The PCB is identical except some components are not included on the board and it is designed to be a slave to the master controller.

 

[ajw22]

Hello I reciently replaced a mother board however I’m having issues programming and setting up the pool to run off of the Auxiliary’s

I think all of your problems are because you got an i5X board instead of a i5P board.