- Oct 8, 2020
- 572
- Pool Size
- 19440
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
The TF-Pro test kit uses the 10ml test for CH. The Taylor video I saw called for 25ml water. According to that video, I'm supposed to modify the normal test by adding R-0012 first, but not sure how much with the 10ml version.
Are there clear instructions I can try?
The issue I'm having is that the mixture takes forever to turn to blue. I can't determine the endpoint, nor how long I should wait between each drop of R-0012. According to other forum posts I found, should be about 1 second for each drop but that's way too fast for me.
Today is the first day I started testing CH every month instead of every week. I jumped from 400ppm to 550ppm which seems wrong to me. I must be doing the test wrong (i.e. probably am adding R-0012 too fast and I go past my endpoint because the color change is so slow).
Are there clear instructions I can try?
The issue I'm having is that the mixture takes forever to turn to blue. I can't determine the endpoint, nor how long I should wait between each drop of R-0012. According to other forum posts I found, should be about 1 second for each drop but that's way too fast for me.
Today is the first day I started testing CH every month instead of every week. I jumped from 400ppm to 550ppm which seems wrong to me. I must be doing the test wrong (i.e. probably am adding R-0012 too fast and I go past my endpoint because the color change is so slow).
