I recently upgraded to a Jandy 1.65 VS pump with JEP-R controller. I was controlling the pump and chlorine generator with an external timer, but now I'm controlling the pump on-off times with the controller. I cannot figure out how to control the chlorine generator with the JEP-R controller. Since I have 1.65hp motor, there isn't a set of auxiliary contacts that are in the 2hp motor. I've read both the pump and generator manuals and I cannot find anything that helps. Do I need some other controller to do this? I'm at a loss and need some guidance.
How to control Jandy Tru Clear chlorine generator with a Jandy 1.65 hp VS pump and JEP-R
- Thread starter SYPrince
- Start date
- Jul 21, 2013
- 53,268
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
You have to continue to use your external timer for the Tru Clear and coordinate the on/off time within the pump runtime.