vs pump

I'm getting ready to replace my 32 year old Hayward sand filter with a new cartridge filter. And while I'm at it, I'll be replacing my Hayward Super Pump. I have a 16300 gallon vinyl pool. I've decided on the Hayward SwimClear C3030 (325 sq ft) cartridge filter and a Hayward Super Pump VS...

I have a VS pump. I run it all summer at 2400rpm during the day and 1600rpm at night. Never had any problems or education on what rpm I should really be using so have been happy with those settings. All summer I rarely if ever will see air bubbles in my pump basket or in my filter housing. When...

Hey y'all - second summer with my pool, was finally getting into the swing of things, had to have a pretty decent amount of cement work done a couple of months ago and a lot of the dust got into the pool... In retrospect I should have put the filter on waste but had it just set to filter...

Equipment-Hayward 1.85 THP Variable Speed Pump OmniLogic automation All installed spring 2020 by previous owner/ builder. Under “Select device” I see: MSP. HUA 00-4c-07-f4-a6 version R3.2.0 MP 01-47-07-f3-f8 version R 3.0.0 MSP id 85587 (not sure what this means) Problem: CommLoss...

I recently upgraded to a Jandy 1.65 VS pump with JEP-R controller. I was controlling the pump and chlorine generator with an external timer, but now I'm controlling the pump on-off times with the controller. I cannot figure out how to control the chlorine generator with the JEP-R controller...