I have a generic hot tub with a Balboa control system, HS200VS control board (part number 55098). One of the two pump motors stopped running, everything else is fine. Opened up the panel, confirmed all fuses are good. When I turn the pump on from the control panel I hear the relay click. To test the pump I swapped the pump leads so that the non functioning pump is plugged into the connector for the pump that was running (they are both 240V) and sure enough the pump works, which tells me the pump / capacitor / thermal overload are fine. The relay is on a small circuit board separate from the main board. Looking for help on next steps on troubleshooting.