So I have 6 Hayward Colorlogic 320’s hooked up to an OmniLogic through Hayward transformers. I keep loosing lights every 8 to 12 months which is getting really expensive. They just start ramping up and down and lose some colors. Not all the lights die at the same time. I don’t want to believe that the technology of the led lights are that bad, so I pulled out my multimeter and checked my voltages at the transformer. The line voltage at each one is 120v, but the output from the transformers are between 14.5 to 15v. I know that these lights are supposed to be powered with 14V. Could this be the reason for my high failure rate? What confuses me is that all of the transformers read high. Is this normal? The transformers are only 2 years old.