P
Latest activity Postings Media About
-
-
PPeiloy replied to the thread Hayward Universal ColorLogic Problem.I went with kind, but made a couple of adjustments after a few failures of units within a year each. My own failed it seemed due to heat...
-
PPeiloy replied to the thread Hayward Universal ColorLogic Problem.Yup. Sounds like it’s a failed unit. My failures have been similar. Sometimes they would stay on, but just with a specifics color...
-
PPeiloy replied to the thread Hayward Heat Pro (HP21104T) - Busted PVC Elbow Sensor Holder.Fantastic!
-
PPeiloy replied to the thread Hayward OmniHub Automation.There are a couple things that you can check: 1) Is there a schedule set in the app for the heater? 2) Is the main pump a variable speed...
-
PPeiloy replied to the thread Hayward Automation Question - How to interlock and schedule my heater/salt chlorinator.I don’t know if the chlorinator can be interlocked, but you can check in the interlock settings. Also, I am not sure how your plumbing...
-
PPeiloy replied to the thread Hayward Omnilogic programming for a multi valve feature question.Programming the valve states and pump speed would be best achieved by using themes. So for example, with scenario 1. From the Omnilogic...
-
PPeiloy replied to the thread Hayward Automation Question - How to interlock and schedule my heater/salt chlorinator.I am not sure about the chlorinator, but the heater can be tied to a mode by configuring equipment to mode in the interlock settings. I...
-
PPeiloy replied to the thread Hayward Laminar Jet not creating clean stream.I am not sure if the Pentair uses the same design. The issue with Hayward is there are screens that need to be equally spaced on...
-
PPeiloy replied to the thread Hayward Laminar Jet not creating clean stream.It can take a lot to unscrew it the first time. Remove the laminar can from the housing, remove the light and hoses. If I remember...
-
PPeiloy replied to the thread Hayward Heat Pro (HP21104T) - Busted PVC Elbow Sensor Holder.Try searching for a thermowell elbow. It look like one.
-
PPeiloy replied to the thread Hayward Laminar Jet not creating clean stream.Great news! Enjoy the pool!
-
PPeiloy replied to the thread Hayward Laminar Jet not creating clean stream.I had a similar problem when my own were first installed. It also affected the lighting of the laminar. What I eventually figured out is...
-
-
Loading…
-
Loading…
-
Loading…