What am I doing wrong? I’ve wired this per the instructions. I have an Intermatic timer “running” it, but the valve actuator never moves on it’s own. It will operate fine if I move the switch on the side, so I believe the actuator is working just fine.
The transformer is wired to full time power and presumably works fine sine the valve will operate via the switch on the side of the actuator. . One of the black and white trigger wires is wired to constant power and the other is wired to switched power. Is this not correct? HELP!!!
The transformer is wired to full time power and presumably works fine sine the valve will operate via the switch on the side of the actuator. . One of the black and white trigger wires is wired to constant power and the other is wired to switched power. Is this not correct? HELP!!!