Hello, we have a new 950VS with the Omnilogic automation system. All was working fine until we had a power outage. When the power came on the VS950 was no longer being recognized by the Omnilogic. The Hayward Unique Address (HUA) of the pump is not transmitting to the control unit.
I can control the pump manually from the controls on the pump. Although the time is incorrect and I cannot get into the Configuration Menu on the pumps small screen, it says it's locked.
Pic 1= Omnilogic config when attempting to add pump
Pic 2= where the pump comm connection is on the Omnilogic panel
Pic 3= the pump, the black, yellow, and bare are the comm connection wires going to the Omnilogic panel.
ANY help with this would be appreciated. Hayward had not been any help.
I can control the pump manually from the controls on the pump. Although the time is incorrect and I cannot get into the Configuration Menu on the pumps small screen, it says it's locked.
Pic 1= Omnilogic config when attempting to add pump
Pic 2= where the pump comm connection is on the Omnilogic panel
Pic 3= the pump, the black, yellow, and bare are the comm connection wires going to the Omnilogic panel.
ANY help with this would be appreciated. Hayward had not been any help.