Hey friends. One day my pool will truly be troublefree but for now (and the past 3 years) it has not been lol I say that because I already drained the pool last year and hoping not to do it again. Not even sure if I can do a partial drain with how hot it is here in Vegas now.
My current issue is I don’t think my SWG is reading the salt correctly. I know my salt is a little on the high side due to my husband adding too much last summer. I took some manual tests. Do we think the SWG is reading right based on the pics of my tests? I used two different tests.
Also see diagnostic and system info below
Salt 5600
Temp 84
Cell voltage 24.6
Cell current 6.92
Desired output 52%
Instant read -5400
AL-0
R 1.59
T-9
T cell 940 aquarite 900 Hayward about 3 years old
My current issue is I don’t think my SWG is reading the salt correctly. I know my salt is a little on the high side due to my husband adding too much last summer. I took some manual tests. Do we think the SWG is reading right based on the pics of my tests? I used two different tests.
Also see diagnostic and system info below
Salt 5600
Temp 84
Cell voltage 24.6
Cell current 6.92
Desired output 52%
Instant read -5400
AL-0
R 1.59
T-9
T cell 940 aquarite 900 Hayward about 3 years old
Attachments
Last edited: