Hi all,
I have been having issues with my SWG generating enough chlorine in my pool. At 1st it seems my pool was eating up CYA too fast so I have been adding it constantly (3 full socks about 10 lbs in the last month) My current testing shows CYA at 80 but FC continues to drop. My SWG is almost 4x the size for my pool (t-15 for 12K pool). The lights on the swimpure plus are all ok, no errors. I pulled the cell and had leslie test it and it tested ok, yet it still doesn't seem to generate chlorine. I've been pouring liquid chlorine in lately and even that seems to be getting used too fast (3 gallons in the last 2 week or so). Here's my current test results (kits used in my sig). Curently pool is clear and covered with solar bubble cover (but I've removed that a few times and no change)
fc 6.0
cc 0.0
ph 7.0
cya 80
ta 80
salt 3400
ch 30
and here's the diagnostics on the swimpure plus (note almost 2 years old) which passes test at leslies
3400
temp 90 (note this is solar return temp the pool was about 4 degrees cooler)
Volts 26.5
Amps 7.6
outut 100p
instant salinity -3400
product al-2
software 1.59
cell t-15
Now I only have it generating about 6 hours a day at 100% but I have never needed even close to that much and if I don't add liquid chlorine the FC keeps dropping. I normally never have to post here for pool issues but this one is driving me nuts and I'm about to leave for a week vacation so wanted to get any ideas?
I have been having issues with my SWG generating enough chlorine in my pool. At 1st it seems my pool was eating up CYA too fast so I have been adding it constantly (3 full socks about 10 lbs in the last month) My current testing shows CYA at 80 but FC continues to drop. My SWG is almost 4x the size for my pool (t-15 for 12K pool). The lights on the swimpure plus are all ok, no errors. I pulled the cell and had leslie test it and it tested ok, yet it still doesn't seem to generate chlorine. I've been pouring liquid chlorine in lately and even that seems to be getting used too fast (3 gallons in the last 2 week or so). Here's my current test results (kits used in my sig). Curently pool is clear and covered with solar bubble cover (but I've removed that a few times and no change)
fc 6.0
cc 0.0
ph 7.0
cya 80
ta 80
salt 3400
ch 30
and here's the diagnostics on the swimpure plus (note almost 2 years old) which passes test at leslies
3400
temp 90 (note this is solar return temp the pool was about 4 degrees cooler)
Volts 26.5
Amps 7.6
outut 100p
instant salinity -3400
product al-2
software 1.59
cell t-15
Now I only have it generating about 6 hours a day at 100% but I have never needed even close to that much and if I don't add liquid chlorine the FC keeps dropping. I normally never have to post here for pool issues but this one is driving me nuts and I'm about to leave for a week vacation so wanted to get any ideas?