I just installed a new Intelliflo VS pump on our pool. Using the Intellicenter web portal, I created some feature circuits for the various speeds I would like to use. If you then go to pumps and add the VS pump and then add the circuits all is well. However once you save your pump setting the first time, if you go back and try to add another feature circuit, when you click the orange down arrow, the feature circuits do not appear in the list of available circuits to choose. The only way around this is to delete the pump and start over again. Is anyone else experiencing this? Is it a bug or am I doing something wrong?
Having trouble associating feature circuits using Intellicenter Web Portal
- Thread starter Mark McLeroy
- Start date
- Jul 21, 2013
- 53,469
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
See if this helps..
www.troublefreepool.com
www.troublefreepool.com
Intellicenter 2 - After upgrade cannot add new programs
I recently upgraded my i10PS to the latest firmware, and now access via Intellicenter2.com and the associated app. However, I am unable to add any new programs for any feature circuit or circuit group other than Pool and Spa. I can click add program, select a feature circuit, but if I click...
www.troublefreepool.com
IntelliCenter Circuits / Pump and Valve Associations
There seems to be quite a bit of questions lately regarding IntelliCenter Feature Circuits and how to associate those circuits with Pump Speeds and/or Flows and Valve Actuator associations. In addition, questions regarding the creation and uses of Circuit Groups (macros) appears to be another...
www.troublefreepool.com