What would be a better choice ( last longer, very little maintenance)for a 1/4” grout joint on copping pavers. Type S mortar of laticrete epoxy grout?
Thanks
Type S will fill any joint. Make sure you seal the coping first if its porous or you will have streaking where the mortar was worked in. Test a scrap if not sure. The only place worth using epoxy grout is waterline tile. You can tint the mud if you need to. Quickcrete pro finish is pretty white when dry for example
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!