Greece in Georgia - Taking Bids

[panic_button]

6" is a little shallow for a tanning ledge.

 

[TecHHeadDD]

6" is a little shallow for a tanning ledge.

Right you are. Already discussed with the PB. Changed to 12" so the toddlers can chase the adults out of their loungers. I'd thought about a little deeper, but some of the loungers would be submerged.

 

[kimkats]

so the toddlers can chase the adults out of their loungers.

LOL..............that is why night swims are so awesome......the kids are in bed!!!

 

[TecHHeadDD]

LOL..............that is why night swims are so awesome......the kids are in bed!!!

So true...there will certainly be a LOT of that!

 

[kimkats]

another thing I LOVE to do is swim in a Spring shower with no lighting around of course. It is so neat to be under the water when it is raining! OH jumping into the pool after or during mowing the yard!!

 

[TecHHeadDD]

So after 2 days of excavation...

 

[YippeeSkippy]

Whoa! That's a bang up nice job of digging! Very clean and neat.

 

[kimkats]

Do you think they are done? When you think they are done you have your first "job" as a pool owner.......take the plans and a tape measure out to the pool.....is it wide, deep, long, etc enough? Add about 8" for the steel, shell, and plaster. NOW is the the time to fix/tweak!

Kim

 

[jimmythegreek]

Nice clean dig they got a good operator. Tape measure all of it as suggested

 

[TecHHeadDD]

Nice clean dig they got a good operator. Tape measure all of it as suggested

Measured 53" to the center of the skimmers from the floor of the excavation. Water depth desired is 48", which leaves 5" for rebar and concrete on the floor under the pool floor. Does that seem appropriate?

Width of the excavated walls measures 20' but the contract calls for a 20' wide pool. Once rebar and concrete are applied to the walls there may be as much as a foot less width? Am I missing insight on industry standard as to what constitutes width - actual water width inside or the form of the pool outside the walls ?

 

[YippeeSkippy]

Sometimes you have to specify "water depth" not wall height. I wonder if that is the case here?

Maddie

 

[TecHHeadDD]

Sometimes you have to specify "water depth" not wall height. I wonder if that is the case here?

Maddie

Specified height to middle of the skimmers/water height. Put out a call to PB to chat before rebar goes in.

 

[jimmythegreek]

theres gonna be more than 5" when gunite guys are done. its kind of common to have variations the guys just slam it in and the measurements are rough. hes gonna offer to take a little money off the price instead of fixing it. fixing it is a pain in the you know what

 

[TecHHeadDD]

theres gonna be more than 5" when gunite guys are done. its kind of common to have variations the guys just slam it in and the measurements are rough. hes gonna offer to take a little money off the price instead of fixing it. fixing it is a pain in the you know what

Roger that. Had the site manager out, and it did turn out that the width was cut to form not to water width. A failure to communicate. They'll back out that cost. I don't want to start from scratch. Turns out with people trapped at home for the summer, they've been up to their elbows in calls for pools. For now I'm at the front of the line. 18 x 42 will be livable.

 

[jimmythegreek]

Plenty big....keep going and get it in so you can enjoy the quarantine and summer

 

[l1ltaral1l]

Gahhhh it's looking beautiful!

 

[Zamspa]

I'm excited to watch this pool to completion, beautiful design

 

[TecHHeadDD]

 

[TecHHeadDD]

Watered for 7 days...next electrical and ceramics

 

[jimmythegreek]

Looks really good so far nice attention to detail in the lines