Hi All, Have just made the switch from pool shop testing to a Clear Choice test here in Australia and performed my first test.
My readings are as follows and am keen for some input. Currently looks like I just need to add some CYA
FC - 4.5
CC - 0.5
PH - 7.8 (but could be higher as this is as high as the kit I have goes)
TA - 75
CH - 525
CYA - 30 or less? CYA is one of my questions. I can still see the dot at the bottom of the viewing tube with my test sample but there is a test sample provide in the kit and i can see the dot with that as well.
Salt - 4800 (seems high, we have had a bit of rain lately and I have back washed some out, haven't added salt in probably 6+ month - perhaps i've been over salting based on the pool shop?)
CSI - .16 (but i am guessing the water temp at 26C)
My water is nice and clean and clear.
Thanks for the guidance!
My readings are as follows and am keen for some input. Currently looks like I just need to add some CYA
FC - 4.5
CC - 0.5
PH - 7.8 (but could be higher as this is as high as the kit I have goes)
TA - 75
CH - 525
CYA - 30 or less? CYA is one of my questions. I can still see the dot at the bottom of the viewing tube with my test sample but there is a test sample provide in the kit and i can see the dot with that as well.
Salt - 4800 (seems high, we have had a bit of rain lately and I have back washed some out, haven't added salt in probably 6+ month - perhaps i've been over salting based on the pool shop?)
CSI - .16 (but i am guessing the water temp at 26C)
My water is nice and clean and clear.
Thanks for the guidance!