Finally upgraded!

[aquam4n]

Hello!
I have a 3HP jandy stealth single speed pump that's coming out and a Pentair Intelliglo3 VSP going in, any advice before I start it?

 

[ajw22]

You have the optional LCD panel on your Intelliflo3?

Get the Pentair HOME app downloaded to your phone and the app connected to the pump by WiFi or BlueTooth.

 

[sduda210]

Once installed play with the settings to see what speed you need to run to accomplish what you want. I keep a cover on my pool most of the time. So I run my pump at the slowest speed possible that still activates the salt system. When the cover is off I like to run it a little faster since it skims better. If you have water features, how slow can you run it and still get the effect you want.

 

[aquam4n]

Should I pull the lid seal and lube it?

 

[aquam4n]

You have the optional LCD panel on your Intelliflo3?

Get the Pentair HOME app downloaded to your phone and the app connected to the pump by WiFi or BlueTooth.

I do not have the screen, the pump has an antenna. Is it worth it to get the screen?

 

[wireform]

Should I pull the lid seal and lube it?

Always, I believe it comes with the pump unions which have O rings too which will need to be lubed also.

 

[aquam4n]

It came with unions but the jandy unions work with the Intelliflo. I'll lube the inlet, outlet and basket rings and I should be good to go

 

[ajw22]

I do not have the screen, the pump has an antenna. Is it worth it to get the screen?

I do not like being dependent on having a phone at hand to program or operate the pump or see any diagnostics.

 

[aquam4n]

I do not like being dependent on having a phone at hand to program or operate the pump or see any diagnostics.

Makes sense, ordering the retrofit screen, thanks for the advice!