Filter pump is not completely filled with water

AayDee

Member
Apr 18, 2024
6
Atlanta, GA
Have had system for about 2 years and recently noticed the spillover from spa to pool was not looking right, very weak flow.
Checked the filter pump and it not completely filled with water and see air.
Things done thus far ..
1. Tried priming the pump again for filling water
2. Check the o-ring and applied lube
3. Cleaned all filter baskets
Have attached a pic of the system.

Any ideas ?
 

Attachments

  • IMG_9962.jpg
    IMG_9962.jpg
    815.6 KB · Views: 15
Make sure your water level is high enough and not allowing air into the system at the skimmers. Play around with the suction / intake valves and see if the air bubbles increase or decrease. This may help you isolate the problem area.
 
Have had system for about 2 years and recently noticed the spillover from spa to pool was not looking right, very weak flow.
Checked the filter pump and it not completely filled with water and see air.
Things done thus far ..
1. Tried priming the pump again for filling water
2. Check the o-ring and applied lube
3. Cleaned all filter baskets
Have attached a pic of the system.

Any ideas ?
When was the filter last cleaned? That should always be the first place to look.