Opened pool 5/17.....levels tested using TF-100 kit:
FC 0
pH 7.0
TA 70
CH 125
CYA 0
Water dirty/cloudy but not green. Couldn't see bottom drains.
Added cal-hypo (48%) 16oz bag and 64oz solid stabilizer.
I'm in Ohio ...all week has been cold and cloudy (temps 50s). Added salt 5/18 and salt levels are now 3100.
5/20 pm levels:
FC 1
CC 7 (eek)
CYA 50
pH 6.8
TA 70
CH 125
water more clear but little cloudy. Can now see bottom drains.
Added 400oz liquid bleach (8.25%) and turned off swg.
Tested one hour later...no increase in FC. Pump remained on all night. Water temp 48 degrees.
Tested 5/21 am and levels:
FC 1
CC 4
All other levels remained same
Is this normal that I can't increase my FC even after dumping that much bleach in? Do I continue the SLaM method and add 340oz bleach every day??
I feel like I'm going crazy.
FC 0
pH 7.0
TA 70
CH 125
CYA 0
Water dirty/cloudy but not green. Couldn't see bottom drains.
Added cal-hypo (48%) 16oz bag and 64oz solid stabilizer.
I'm in Ohio ...all week has been cold and cloudy (temps 50s). Added salt 5/18 and salt levels are now 3100.
5/20 pm levels:
FC 1
CC 7 (eek)
CYA 50
pH 6.8
TA 70
CH 125
water more clear but little cloudy. Can now see bottom drains.
Added 400oz liquid bleach (8.25%) and turned off swg.
Tested one hour later...no increase in FC. Pump remained on all night. Water temp 48 degrees.
Tested 5/21 am and levels:
FC 1
CC 4
All other levels remained same
Is this normal that I can't increase my FC even after dumping that much bleach in? Do I continue the SLaM method and add 340oz bleach every day??
I feel like I'm going crazy.