We are still building and just received part of our equipment. They are suppose to come out this week and start installing it. Is there anything we should confirm with the plumber or electrician or be sure they do. This is what received so far: Pentair Gas Heater, pentair cartridge filter, pentair Vsf pool and spa pump, salt cell, chlorinator, spa blower, and lights. We are missing the Intellicenter and UV bioflow which both will be installed at a later time. Thanks
Equipment install
- Thread starter ColdwaterTexas
- Start date
- Jul 21, 2013
- 53,343
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Equipment Pad Best Practices - Further Reading
www.troublefreepool.com
Install a Heater Bypass - Further Reading
C,
What is the purpose of the UV system??? Absolutely not needed and will do nothing to help sanitize your pool.
Make sure they install your $1,500 IntelliFlo with pump unions.. They do not come with the pump, but only an idiot would install a pump without them..
Thanks,
Jim R.
What is the purpose of the UV system??? Absolutely not needed and will do nothing to help sanitize your pool.
Make sure they install your $1,500 IntelliFlo with pump unions.. They do not come with the pump, but only an idiot would install a pump without them..
Amazon.com: 2 PACK -CMP Hi-Temp Union 2" inch 2MIP x 2" inch PVC Whisperflo & Intelliflo - 2 PACK: Garden & Outdoor
Amazon.com: 2 PACK -CMP Hi-Temp Union 2" inch 2MIP x 2" inch PVC Whisperflo & Intelliflo - 2 PACK: Garden & Outdoor
www.google.com
Thanks,
Jim R.
Thanks for the reply. We have no idea why they put this in our contract either and thinking of having them take it off since it was delayed so glad to confirm it will not do anything.
