I poured CC straight in and some caked in the deep end. I realize now I should have mixed it. Will it eventually dissipate? Thanks!
Did not mix calcium chloride
- Thread starter Gary999
- Start date
Gary,
Hi and welcome. You need to introduce yourself and tell us what prompted you to add it to the pool. Please fill out your signature with link below so we can easily help you in the future. How are you testing the water. For the meantime use your pool brush and push it around some.
Hi and welcome. You need to introduce yourself and tell us what prompted you to add it to the pool. Please fill out your signature with link below so we can easily help you in the future. How are you testing the water. For the meantime use your pool brush and push it around some.
- Jul 21, 2013
- 66,040
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
This page has our recommendation for how to adjust each chemical...
www.troublefreepool.com
Calcium products should be spread across the surface of the deep end of the pool.
Do not mix calcium in a small bucket of water. When dissolved in water, solid calcium chloride releases heat in an exothermic reaction.
This page has our recommendation for how to adjust each chemical...
Recommended Pool Chemicals
Which should I buy? TFP's recommended pool chemicals are cheap, easy, and won't unbalance your pool water.
www.troublefreepool.com
Calcium products should be spread across the surface of the deep end of the pool.
Do not mix calcium in a small bucket of water. When dissolved in water, solid calcium chloride releases heat in an exothermic reaction.
What is the pool surface?
When broadcasting calcium chloride, it's important to brush immediately to prevent it sticking to the floor.
It the floor is vinyl, be careful not to force the stuck calcium chloride or it can damage the liner.
My preference is to premix it.
It does release heat as it dissolves, but, as long as you don't dissolve too much at a time, the heat is not a problem.
Limit the amount to about 2 to 3 lbs per gallon of water.
When broadcasting calcium chloride, it's important to brush immediately to prevent it sticking to the floor.
It the floor is vinyl, be careful not to force the stuck calcium chloride or it can damage the liner.
My preference is to premix it.
It does release heat as it dissolves, but, as long as you don't dissolve too much at a time, the heat is not a problem.
Limit the amount to about 2 to 3 lbs per gallon of water.
Last edited:
It is dissolving with no discoloration. Thanks to all for the replies. I used the Laglier saturation index and compensated for balance drift. Vinyl with Hayward generator.
Similar threads
