Good morning! I have a question about raising my CYA. Just opened the pool three days ago and water is clear. Here are my test results from last night:
CC - 6
CYA - 50
PH - 7.6
Alkalinity - 110
CH - 120
My CYA was 80 last year (when I found this site) and we drained the water level below the skimmer when we covered the pool for winter and filled with fresh water to open it. We just installed a SWG also which I have not turned on yet. Pool math is telling me to add 4.5 pouds of stabilizer to get my CYA to 70. I still have leftover shock and 3 in tablets....can I use those to raise the CYA? Assuming it would just take longer but not sure if it would mess up anything else. And if so is it safe to get the SWG started with my current levels?
CC - 6
CYA - 50
PH - 7.6
Alkalinity - 110
CH - 120
My CYA was 80 last year (when I found this site) and we drained the water level below the skimmer when we covered the pool for winter and filled with fresh water to open it. We just installed a SWG also which I have not turned on yet. Pool math is telling me to add 4.5 pouds of stabilizer to get my CYA to 70. I still have leftover shock and 3 in tablets....can I use those to raise the CYA? Assuming it would just take longer but not sure if it would mess up anything else. And if so is it safe to get the SWG started with my current levels?