Hello Again All,
I took a sample yesterday to my local Leslie’s Pool and got these readings,
FAC -0
TAC -0
Salt -3800
CH -200
CYA - 30
TA -90
PH -7.4
Copper -0
Iron -0
Phosphates -600
So they tell me salt is high, need to add chlorine, and that my phosphates are is high. Also my CYA are low, and that I need this and that total amount to be $101. Now to the true professional non- teenager really tell me what is going on? My swg is reading 2400 and then gives me the signal that I have low salt, and to inspect cell. I have already cleaned the cell as recommended on here. What do I need to do next to get my kids in here ASAP. I am looking like a failed father at the moment with these kids. Water is sparkling blue/clear, I need to vacuum to waste today to get the rest of the small dirt that has settled on the bottom. And top off, any advice would be greatly appreciated.
Thanks and Happy Friday y’all!
Ed
I took a sample yesterday to my local Leslie’s Pool and got these readings,
FAC -0
TAC -0
Salt -3800
CH -200
CYA - 30
TA -90
PH -7.4
Copper -0
Iron -0
Phosphates -600
So they tell me salt is high, need to add chlorine, and that my phosphates are is high. Also my CYA are low, and that I need this and that total amount to be $101. Now to the true professional non- teenager really tell me what is going on? My swg is reading 2400 and then gives me the signal that I have low salt, and to inspect cell. I have already cleaned the cell as recommended on here. What do I need to do next to get my kids in here ASAP. I am looking like a failed father at the moment with these kids. Water is sparkling blue/clear, I need to vacuum to waste today to get the rest of the small dirt that has settled on the bottom. And top off, any advice would be greatly appreciated.
Thanks and Happy Friday y’all!
Ed