How important is CSI? My numbers look okay (I think you can see them) but CSI is -0.58. Is there anything I should be doing to get that number above -0.30?
CSI?
- Thread starter NaCLTPool
- Start date
- May 3, 2014
- 62,717
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
You have a fiberglass pool. Unless you have waterline tile with cement based grout, low CSI is of no concern to you.
With a SWCG, you want to keep your CSI below 0. If that is not an issue, then turn OFF Tracking CSI in Poolmath.
With a SWCG, you want to keep your CSI below 0. If that is not an issue, then turn OFF Tracking CSI in Poolmath.
Similar threads
