- May 16, 2011
- 1,180
- Pool Size
- 28000
- Surface
- Plaster
- SWG Type
- Pentair Intellichlor IC-60
How much do I have to worry about the CSI getting way out of range when I purposefully lower TA using the method explained here at TFP? If I were to lower the PH with acid to 7.0, that would put my CSI at -0.6. Or is it so temporary that it shouldn't matter?
These are my current numbers:
FC = 8
CC = 0
PH = 7.8 (Just brought it down to 7.5 with acid)
CH = 250
TA = 125
Salt = ~3500 (Raised slightly because of my recent SLAM)
CYA = 80 (I need to recheck this now that my SLAM is over. We had rain that overflowed the pool during the SLAM and plenty of splash out from kids.)
Temp: 90
Thanks!
These are my current numbers:
FC = 8
CC = 0
PH = 7.8 (Just brought it down to 7.5 with acid)
CH = 250
TA = 125
Salt = ~3500 (Raised slightly because of my recent SLAM)
CYA = 80 (I need to recheck this now that my SLAM is over. We had rain that overflowed the pool during the SLAM and plenty of splash out from kids.)
Temp: 90
Thanks!