I just got an Easy Touch 4 system and have a couple of questions concerning how to connect it electrically.
1. The Control Transformer: I connected the black wire to a 15 amp circuit breaker and the violet wire to neutral. Correct?
2. The relays. I have a 240 volt single speed pump. I connected the far left terminal (#1) of the filter pump relay to one terminal of the 20 amp duplex circuit breaker. The next terminal (#2) to the right on the filter pump relay I connected to one wire on the pump. The next terminal on the relay (#3) I connected to the other terminal of the duplex circuit breaker and the far right terminal of the relay (#4) I connected to the other wire of the pump. I connected the wire in the electronics bay (upper section of the easy touch) that goes to the filter pump relay to the connection that's labeled "Filter Pump".
3. Pool light. Using the Aux 1 relay I connected the hot wire from the light transformer to the #1 terminal on the relay and a wire from a 20 amp circuit breaker to the #2 terminal of the relay. In the electronics section I connected the wire from the Aux 1 relay to the port labeled Aux 1.
Correct so far??
1. The Control Transformer: I connected the black wire to a 15 amp circuit breaker and the violet wire to neutral. Correct?
2. The relays. I have a 240 volt single speed pump. I connected the far left terminal (#1) of the filter pump relay to one terminal of the 20 amp duplex circuit breaker. The next terminal (#2) to the right on the filter pump relay I connected to one wire on the pump. The next terminal on the relay (#3) I connected to the other terminal of the duplex circuit breaker and the far right terminal of the relay (#4) I connected to the other wire of the pump. I connected the wire in the electronics bay (upper section of the easy touch) that goes to the filter pump relay to the connection that's labeled "Filter Pump".
3. Pool light. Using the Aux 1 relay I connected the hot wire from the light transformer to the #1 terminal on the relay and a wire from a 20 amp circuit breaker to the #2 terminal of the relay. In the electronics section I connected the wire from the Aux 1 relay to the port labeled Aux 1.
Correct so far??