Good morning i have a week old pool, that wont hold chlorine, here are my readings from yesterday:
FC -> 0
pH -> 8.0
TA -> 50
CH -> 250
CYA -> 0
Added about 1/2 gallon of acid, reading from today shows around 7.0 I also added a gallon of liquid chlorine yesterday (Sodium Hypo 10.5%) and still FC sitting at 0 this morning, i also have 2 chlorine tablets inside my skimmer as instructed by PB.
Is there anything else i need to do?
FC -> 0
pH -> 8.0
TA -> 50
CH -> 250
CYA -> 0
Added about 1/2 gallon of acid, reading from today shows around 7.0 I also added a gallon of liquid chlorine yesterday (Sodium Hypo 10.5%) and still FC sitting at 0 this morning, i also have 2 chlorine tablets inside my skimmer as instructed by PB.
Is there anything else i need to do?