Hi Guys,
Getting a new error message here. "Chlorinator Off Sensor Fault" & "Cell Door Open." I haven't touched the thing.
To be quite frank, i'm stressed and busy with work so i'm about to call pinch a penny to come out and diagnose because I don't have time to be troubleshooting. But I wanted to come here first to see if it's an easy solve. Only troubleshooting I did was look at the wires (nothing out of the ordinary) and unplug/plug the SWG cell cable from the Goldline Remote board.
To be honest, we've had the pool/house for 2 1/2 years and I have never once cleaned the cell ( didn't even know that was a thing until recently). I don't know how old the unit is but i'm almost positive it's older than 2 1/2 years.
Other than that, water temp has been about 90F lately (according to the remote). The salt water is indicated at 3200-3300. My taylor test came out to 3600-3700 Saturday so not too far off.
Any idea?
Getting a new error message here. "Chlorinator Off Sensor Fault" & "Cell Door Open." I haven't touched the thing.
To be quite frank, i'm stressed and busy with work so i'm about to call pinch a penny to come out and diagnose because I don't have time to be troubleshooting. But I wanted to come here first to see if it's an easy solve. Only troubleshooting I did was look at the wires (nothing out of the ordinary) and unplug/plug the SWG cell cable from the Goldline Remote board.
To be honest, we've had the pool/house for 2 1/2 years and I have never once cleaned the cell ( didn't even know that was a thing until recently). I don't know how old the unit is but i'm almost positive it's older than 2 1/2 years.
Other than that, water temp has been about 90F lately (according to the remote). The salt water is indicated at 3200-3300. My taylor test came out to 3600-3700 Saturday so not too far off.
Any idea?