So the copper is 0.4 at the pool store that specifies the copper. What should I do now?
Can’t get any free chlorine reading
- Thread starter Jennybird
- Start date
- May 3, 2014
- 62,705
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
0.4 indicates staining is likely. Hopefully it has not already occurred.
To be safe, you should drain as much water from the pool as you feel safe to keep the liner from shifting. Most above ground pools can be drained down to 18" of water left in them, but be ware your liner can shift and then you have issues.
To be safe, you should drain as much water from the pool as you feel safe to keep the liner from shifting. Most above ground pools can be drained down to 18" of water left in them, but be ware your liner can shift and then you have issues.
OK will do. When I start refilling the pool do I put the same amount of liquid chlorine in tonight as I have the last couple nights?
- May 3, 2014
- 62,705
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
So I’m getting my test kit today and I’m wondering if there’s a certain time of day I should be testing?
There’s no time like the present. (At that time). Your FC will consume 2-4 ppm per day once we get you all fixed up. So later in the day it will be a bit less than you started with. But the other #s will all be the same at any time in a given day.
So I got my kit and I have my smart stir, the only problem is the test tubes don’t fit in the smart stir. Did you guys order test tubes separately?
Pics please ? Never heard that one before, but there has been some packaging errors lately with all the hoopla the shipping/retail industry has been going through.
It fits the reagent bottle that’s 22 mL perfectly but the tubes are too big!
- May 3, 2014
- 62,705
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Assuming you ordered from TFTESTKITS. Email the picture to them.
[email protected]
[email protected]
waterl0gged
Well-known member
That is a "smart stir" , not a "speed stir" . 2 different types of test kit mixers .
You need a "Speed Stir" by Taylor technologies .
The "smart stir" one will not work with the TF100 test kit vials .
I am assuming TF was out of the "Speed stir" by Taylor ? Did they substitute for a "Smart stir" ? That would be odd .
You need this one ........... Speed Stir
Anyway .......just mix manually for now to get the ball rolling on slaming the pool !
You need a "Speed Stir" by Taylor technologies .
The "smart stir" one will not work with the TF100 test kit vials .
I am assuming TF was out of the "Speed stir" by Taylor ? Did they substitute for a "Smart stir" ? That would be odd .
You need this one ........... Speed Stir
Anyway .......just mix manually for now to get the ball rolling on slaming the pool !
OK, I just did. In the meantime, do I just use the test tubes and stir them up myself?
So I’m doing the chlorine drop test, I put the powder in and it didn’t turn pink it just became cloudy. Do I still put the solution in to take the cloudiness away? Even if it’s not pink?
Never mind, it is very very slightly pink so I will add the solution until it becomes clear.
Help! I put in 100 drops of the 0871 and it is not going back to clear it is still slightly cloudy. Is this normal?!