Aquatools AT3124 sand filter valve positions

[bercy]

Hi,

I have an old filter installed outside, and the sun has faded the ink on top of the valve. I can only see that Backwash is at the top position, I know Filter is at the bottom, and Rinse is at “40 minutes”.

I was hoping someone could help me with the other 3 positions ?

Thx.

 

[YippeeSkippy]

Does this help?? Copied this from the INYOpools site. Aqua Tools Sand Parts - INYOPools.com

 

[bercy]

Not the same valve, and I can assure you I tried to get a picture of my model on Google :-(

But thanks for your reaponse

 

[JamesW]

https://www.pentair.com/content/dam/extranet/nam/industrial-flow-technologies/flow/ift-asset-library/manuals-lit-fulfillment/aquatool/archive/AT242EN(5-5-00).pdf

 

[bercy]

Hmmm, not the same valve again, here’s mine, 6 positions, Backwash at 12 o’clock, Filter at 6, Rinse is at 8 from memory, and I can now see circulate at 10.

 

[JamesW]

https://www.pentair.com/content/dam/extranet/nam/industrial-flow-technologies/flow/ift-asset-library/pool-spa/WC80-132%20Parts%20List.pdf

 

[bercy]

Hmmm, not the same valve again, here’s mine, 6 positions, Backwash at 12 o’clock, Filter at 6, Rinse is at 8 from memory, and I can now see circulate at 10.View attachment 404791View attachment 404791

Ok, found it by searching wc112-148 on amazon.ca.

 

[JamesW]

 

[bercy]

View attachment 404793
View attachment 404795

Yup, looks like mine, thx

 

[JamesW]

Operating Instruction Decal 14965-0020.