- Apr 26, 2021
- 8
- Pool Size
- 18500
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-9)
Hi. I'm new hear. I have looked a lot for this exact issu, but if I missed I apologize.
My AquaRite after shows 0 avg and instant salt. Both check salt and inspect cell are lit solid. It is T9 cell. The voltage is approx 32 and amperage is 0. I have tried to power cycle but it just goes back to this state after the startup cycle.
I tried to force it to generate burning it up to 100 but no instant salt or current.
I have a feeling it is my board but what else should I be checking? Is the current limiter a likely culprit?
Any guidance would be awesome.
My AquaRite after shows 0 avg and instant salt. Both check salt and inspect cell are lit solid. It is T9 cell. The voltage is approx 32 and amperage is 0. I have tried to power cycle but it just goes back to this state after the startup cycle.
I tried to force it to generate burning it up to 100 but no instant salt or current.
I have a feeling it is my board but what else should I be checking? Is the current limiter a likely culprit?
Any guidance would be awesome.