AquaPure 1400 Troubleshooting


New member
Sep 10, 2010
Suffolk County, NY
I have a Jandy Aquapure 1400. This morning I heard beeping coming from the unit which indicates an error code. The yellow power light was on but there was no display. I replaced the front board at the beginning of the season. I'm guessing I received a bad board? Any suggestions would be helpful.
Thanks, Rich on Long Island

Texas Splash

Mod Squad
TFP Expert
LifeTime Supporter
Jun 22, 2014
Texas, San Antonio/Marion, South-Central Area
Pool Size
Salt Water Generator
SWG Type
CircuPool RJ-45 Plus
Hello Rich and welcome to TFP! :wave: Your question has sat so long without a reply I wanted to reach out and say hello. I also wanted to see if you ever got the error code resolved. If not, please let us know. Perhaps we can tag a specific member or two for assistance. Post back as much as you need to so this thread stays active. Have a good day. :swim:
Thread Status
Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.