- Jul 7, 2020
- 100
- Pool Size
- 9800
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
Aquapure was working fine until a day or two ago (after a party). Filter pressure seems fine and salt levels are at about 3000. The pool and salt cell are about 2 years old. Could it be scaling on the salt cell? It doesn’t appear to be a flow issue. I believe all the indicators mean that it is working, just not producing chlorine. For reference, I usually only need to run the pool around 35-40% to get proper chlorine levels. The pool is max 4.5 feet deep and a hair under 10k gallons so the Aquapure 1400 is a little overkill, but I like not having to max out the salt cell. I appreciate any help.