Just bought a house with a JS4. It's constantly spilling over from the spa. Although I don't care for the noise, what concerns me most is evaporation. Seems like we are always adding to this pool. I have gone in the pool when pump not running and checked for water leaks and have found nothing. I researched how all this works and I ended up turning on dip switch 3 to enable pool spill over feature. what was set up was spill over was actually off, but the had the valve set to not close completely. So I set it up properly to turn spill over off and on. Problem is is if spill over is turned off, there is no circulation in the spa. I would have thought those two would be running independent of each other. So I can't leave spill over off all the time. Next I look into turning spill over on and off automatically each day so water circulates in the spa. No such luck there. Am I missing something? Right now we spend our time split between Florida and up north and I want something automated. Best case scenario is the ability to turn on and off the spill over during the time the pool is running.
thanks
thanks