nikolausp
Gold Supporter
I believe you noted you have an Easytouch panel (and screen logic is not installed yet) - to change your pump speed from the panel look at this document and page 27 I believe.
https://www.pentair.com/content/dam/extranet/product-related/product-manuals/pool-and-spa-equipment/easytouch/EasyTouch 8 and 4 Pool and Spa Indoor Control Panel Installation-Users Guide_English.pdf
As noted by others it uses the "Pool" circuit pump speed for the speed of Freeze Protection, that is likely the only one you should have to worry about for now.
If you don't know which pumps or equipment you have I'd be trying to reach the pool company. Or post pictures here, many are willing to continue to help.
Ok great, thanks.
I was able just now to go outside to the panel, and turned Pump #1 [POOL] on Circuit 1 up to 3100 RPM. I think it goes up to 3450, but I figured hopefully 3100 is plenty high, unless somebody here thinks I might as well crank it up higher, then I will.