Hi, I have a 24' AG and a 2HP pump. I just put on a new pump lid, o-ring and the thing that goes over lid and locks it down. I have a Zodiac Ranger pool cleaner and when I use it AIR gets in the pump. Tiny little Air bubbles come in and form a big Air pocket over 20 to 30 minute time. I have pvc plumbing and there is no water leaking from anywhere. Made sure there was no air in hose or the Zodiac. Anyone have a clue why this is happening?
Air in pool pump?
- Thread starter Pam in Texas
- Start date
- Jun 22, 2014
- 47,900
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Did you add pool silicone lube to the o-ring under the clear lid on that pump basket?
- May 3, 2014
- 58,621
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Pool Lube - Further Reading
www.troublefreepool.com
Vaseline is a petroleum product that will break down the rubber gasket and make it gummy. Read the above article.
Oh goodness, I will get that! Thanks!Pool Lube - Further Reading
Vaseline is a petroleum product that will break down the rubber gasket and make it gummy. Read the above article.
