Adding Screenlogic to Easytouch

Chacha1618

New member
Jun 14, 2024
3
Allen, TX
Miguel,

You can have both ScreenLogic and a Pentair remote.. Both units need their own wireless links...

Thanks,

Jim R.
Found this old thread very informative. I am looking to add Screenlogic to our pool control system where I have already wireless Easytouch. My question is, can the Screenlogic remote (protocol adaptor + wireless transceiver) and Easytouch remote communicate with the same Pentair transceiver on the panel side so I don’t have to install another transceiver there?
 
Welcome to the forum.

You would need the complete Screenlogic package. The transceiver for the ET remote is different.

For only a little more money than the Screenlogic package, you can upgrade your Easytouch to an Intellicenter. That will give you the Screenlogic access with an up to date automation system.

See Pentair Automation Systems - Further Reading
 
  • Like
Reactions: Chacha1618
Hi,
We have an Easytouch remote (wireless) which is still working. Now if I add wireless Screenlogic, do I have to install a new pair of transceivers for the wireless link or can the new protocol adapter + a transceiver located indoor communicate with the existing Easytouch transceiver such that I don’t have to install anything new outside? Basically can two wireless links share a transceiver as the hub? Does that make sense?
Thanks,
Chacha