So for my first post after just joining today I’m starting the job of upgrading my PSL4 easytouch with components to convert it to salt. I’m sharing photos of the system and equipment pad. I installed a mastertemp last year myself and was really pleased how smooth it went (ribbing welcomed on the complex way I had to introduce a loop given the space!)
I am just waiting on the 12amp circuit breaker and SCG cable from board to cabinet. The only question concern I have is the surge board. 521218 is nowhere to be found. I’ve been researching for a few weeks and found few bits of information I’ve pieced together (wish I knew of this site earlier!). I found @ajgraham install post helpful but have more questions specifically for my situation. It seemed 520723 surge board was the logical choice based on research. Pentair parts list has the description “before” and “after” “change date” the only difference between these parts so hoping everything will integrate well with my panel setup.
I have the screws pre drilled for the transformer and 521218 surge board but the 520723 board is different so I’m not sure the best way to attach it to the cabinet. Any thoughts or suggestions greatly appreciated!
I am just waiting on the 12amp circuit breaker and SCG cable from board to cabinet. The only question concern I have is the surge board. 521218 is nowhere to be found. I’ve been researching for a few weeks and found few bits of information I’ve pieced together (wish I knew of this site earlier!). I found @ajgraham install post helpful but have more questions specifically for my situation. It seemed 520723 surge board was the logical choice based on research. Pentair parts list has the description “before” and “after” “change date” the only difference between these parts so hoping everything will integrate well with my panel setup.
I have the screws pre drilled for the transformer and 521218 surge board but the 520723 board is different so I’m not sure the best way to attach it to the cabinet. Any thoughts or suggestions greatly appreciated!
Last edited: