Thank you James.
Features aren't set in stone yet. I need to shallow the deep end, rework the spa, replace the lights, new coping, tile, finish and finally, replace the equipment. The pool is currently 30,000gals and should be around 25,000gal when complete. I was trying to determine my feature capability based on: Converting the pressure side cleaner 1" line to a feature supply line, modify the 2 overflow features on the 1.5" line and potentially run an additional 2" line for any feature that required more water. The pool used to have 3 pumps. One each for the filter and spa with a booster pump for the Polaris(Replacing with a bot). Currently there are 2 skimmers and 1 drain(need to upgrade to 2) and I want to locate where they tie together, split them and route an additional line back to the pad. Granted, I'll need to remove some deck. I am familiar with the flow tables.
Recent Purchase:
Pentair: i10PS Intellicenter Load Center w/Comm card(will add 522038Z valve expansion card if required), IC40 Cell, 4 intellivalve controllers, 2 Intelliflo VSF pumps(011056), Quad DE 100 filter.
Jeff