A little history: I have only every (past 2 years) checked CL and pH with a cheap residential test kit. I have only ever added liquid chlorine, tablets and acid to my pool. Every other test and/or chemical is new to me.
Here are the numbers:
FC= 1.0 ppm (Target= 3)
CC= .25 ppm (Target= <.5)
pH= 7.2 (Target= 7.5)
TA= 40 ppm (Target= ??)
CH= 120 ppm (Target= ??)
CYA= 0 (Target= 30-50)
Saturated Index= -1.1 (Target= -.02)
Water temp= 59°
I know FC is low, no problem, I use liquid bleach from my local pool store. I'll add some in the morning. The CC is less then .5, this is an outdoor pool. The pH is a little on the low side. I was thinking of add some baking soda, not sure how much. I can't seem to find a target TA, mine looks low compared "Pool Math". CYA is low, I will go and buy some solid stabilizer tomorrow. The saturated index is the most alarming (I think). I'm not sure where to start. Thanks in advance!!!
Here are the numbers:
FC= 1.0 ppm (Target= 3)
CC= .25 ppm (Target= <.5)
pH= 7.2 (Target= 7.5)
TA= 40 ppm (Target= ??)
CH= 120 ppm (Target= ??)
CYA= 0 (Target= 30-50)
Saturated Index= -1.1 (Target= -.02)
Water temp= 59°
I know FC is low, no problem, I use liquid bleach from my local pool store. I'll add some in the morning. The CC is less then .5, this is an outdoor pool. The pH is a little on the low side. I was thinking of add some baking soda, not sure how much. I can't seem to find a target TA, mine looks low compared "Pool Math". CYA is low, I will go and buy some solid stabilizer tomorrow. The saturated index is the most alarming (I think). I'm not sure where to start. Thanks in advance!!!