Search results

Spa lights don't need to go topside for repairs, because spas can be drained into the pool, and light can then be repaired on the spa seat/bench area, which only requires 1-1.5' extra cord length to reach.

I read one of his earlier posts, apparently he has an older, obsolete "compol lx100" power center that he is referring to.

The vertical air pipe the blower sits on is to short, you should raise it 2 feet ( 2'' pvc coupler and 2' length of 2'' pvc pipe ) This is probably the reason the blower has gotten wet. Was the blower failure a year ago the result of water damage? ( just curious ) How well do the spa jets...

I have not seen a chlorinator that eventually does not get like that, they all do.

Fertilizer most likely.

No. It is installed dry.

water in the can

try to get vise grips around remaining screw piece and carefully, slowly work it through, it may be awkward but worth a try. Usually the copper colored screw they tell you to use is very hard to thread in compared to the stainless screw which is much easier. this is a very large company that...

I have pulled hundreds of new fixtures, most are usually 50' cords, the most common cord length found on most pools here in Phoenix, first i disconnect it at the j-box, then tie some nylon string around the 3 wires at the end of the cord at j-box, then wrap some electrical tape around wire and...