Search results

I usually have a stenner pump pumping chlorine in the pool at night. I haven’t hooked it up yet since replacing the pump house. Started with new water. (0 chlorine). Last night pool math told me to add 99oz to bring fc level to 3. I added 256oz. Tested it tonight and still 0...

Is there any formula or chart to determine my gph. I have 1-1/2 pipe if that means anything. Doesn’t the pool need to turn over the water at least once a day.

Got pool up and going. Got the 3 hp. What’s a good speed for a 28000 gallon pool. Also can’t remember but what order do you go with chemicals starting with new water.

I tried when I posted the question. Said images was to big. I went ahead and sanded the rust off. Sprayed it with zinsser 1-2-3 and then rustoleum oil based paint.

Just removed my liner to replace it. Man what a job on a 33’ pool. Anyway there is red rust in around where the steps were and white rust around the pool. What would be the correct way to address this

I ordered the 3 hp pump. It has 2” ports but my skimmer and filter has 1-1/2 ports. Would it help any to change pipe to 2” then reduce down to 1-1/2 at filter and skimmer.

I don’t know what sounds right cause I don’t know. I’m just asking questions trying to learn before I make a purchase. Just trying to get a better understanding.

1.5hp is $445 3hp is $519

Would I be wasting money on a 3 hp vs pump when I only have 1-1/2 pipe. If I read it right I would never be able to run the 3 hp on high.

The 1.5hp has 1.5” port which my piping is. The 3 hp has 2”ports. Will it hurt the 3hp pumps longevity if I reduce it down to 1.5” pipe

Have 120v now but can add 220v. Checked out the calimar pump. They have it in 1.5 hp and 3 hp. Which one would I need.

With my old pump being 1.5hp. Does my new pump need to be equal or more in hp. Any suggestions on above ground vs pumps. Would rather not spend $1500 on one.

would a pump on low turn over 26000 gallons in a day. I read somewhere where you would run it on high for 8 hours then on low for 16 hrs. Also I would rather have something I wouldn’t have to manually switch over if I didn’t have too.

The 2 stage pumps I have looked at so far looks like you have to go manually switch between the two. Is that correct?

I use liquid chlorine with a stenner pump

From what I read that law didn’t include above ground pools. Did I read right?

In the market for a new pump this season. Have always had a single stage 1.5hp. Pool is an above ground with approximately 26,000 gallons. Is an vs pump really worth the money. What do you recommend 1 or 2 stage or vs pump.

The pump motor will have been installed 2 years this july. It’s already making a loud annoying noise. I’m thinking bearings need to be replaced. Problem is I’m having trouble finding what parts I need to fix it. Would like to have parts when I tear into it. Also what all would you have to...

Recently installed a Stenner Pump it’s the 85 17gpd pump. If I did it right it should pump around 1.51 oz a minute. It has a #2 tube. Would it be best to pump chlorine into pool 1st thing in morning all at once while sun isn’t out to get more life out of the chlorine before the sun kills it. Do...