Search results

I purchased a Splash IC60 SWG to go back to a salt system. I hooked it up to my existing IntelliPH controller. It works, but the controller says it doesn't and can't seem to get reading like salt reading, etc.. from the IntelliPH unit but from the SWG it displays fine. Is it supposed to be...

Hello, I'm moving back to a salt system due to the price of CL being so high. So today I added the salt to prepare. A couple hours later I decided to go ahead and shock the pool as well (3 bags of the 6-in-1 Clorox brand in 35,000 gal pool). I also threw in the robot cleaner to help mix it...

Hello, I just received a Pentair Tank Mounted Pump 522474 that I ordered to replace the old IntelliPH pump. But the holes for tubbing are way bigger than the 1/4" tubing and the nuts too!!. The kit came with more 1/4" tubing, no adapters. How am I supposed to connect the 1/4" tubing (a...

Hi, Everything was working fine, then it went empty, I filled it back up, now it won't make it through the check valve. I bought a new one, same thing. If I take it off the check valve, it works fine. The tubing is fairly new and stiff. No leaks. What could it be? TIA!!

Anyone know how to get the IntelliPH working without an IntelliChlor attached (do have the controller for the IntelliChlor, but won't auto feed the IntelliPH without IntelliChlor).

Hi, So I have a bunch of this stuff (see attached pics) that has popped up in the deep end (big ones) and also spa seat and the wet deck (pics from). The brownish color matches the clay soil we have out here, i think that is where the color comes from. But nobody seem to know what it is...

Hi, So after about 3 years out of nowhere the CYA jumped way up, started getting yellow algae, I've gone through 3 cycles of draining over 3 months, and yet the CYA is still high. If I accumulate all three drain cycles, I've almost drained the entire pool. Why would that be? Can you do it...

Hi, How can I use the IntelliPH without and IntelliChlor attached? I moved to fresh water but still looking for autofeed of the acid since it still requires it every few days. I'm not worried about too much, I'll adjust it to it can go a couple weeks without needing to add manually. Thanks.

Any recommendation for a unit that will work in a round jacuzzi that is 10' in diameter (has the seat all the way around). TIA!!

Hi, Anybody have experience with the Polaris P955/9550 and the Dolphin supreme M5 (or other Supreme model) that could recommend which one they think is best? Looking in to everything so far, it seems like the Dolphin would have less problems with cords, but cleaning the filters looks to be...

So all of a sudden, I noticed my IntelliChlor (installed 1.5 years ago), is flashing red/green like when first turned on, then it goes to flashing green saying high salt (haven't added any), then powers off, and starts all over. Does it sound like cleaning will help? I have the IntelliPH as...

The PH is rising and the system is red because water is cold. I can manually inject with override when it asks. Does it automatically continue to add? Cold water is no reason to not add acid. I got this to automate, if I have to monitor this manually all winter, that is no good. I was...

Hi, So new to the IntelliPH, it's been working for a few weeks now, so wanting to add some acid, I open the top and there is A LOT of condensation all over the cap and inside walls. I assume it must be acid, and was careful, but it did end up splashing (lots of condensation) on the floor and a...

Okay, so I installed the IntelliPH, very simple, except for the step to drill the 1/2" hole in the 2" PVC pipe you have to be very careful. I learned the hard way by using a long 1/2" bit designed for wood. I thought I was being careful, but maybe just a tiny pressure and snap, it chipped out...

Hi, The pump was running at 2500 RPM (Intelliflo VS) but wasn't cleaning well. Bumped up to 2800RPM and see the filter psi at 20 and the PV3 system saying 7 psi ? Why such a difference. IS that normal? I just cleaned the filters a couple weeks ago (three weeks after filling pool). Lots...

Hi, Have an easytouch system. The SPA circuit has heat by default. Can I setup another circuit to control the same valves without heat? Basically I'd like to turn on the spa 5 to 10 minutes a day on a schedule to suck stuff off the bottom and keep it clean. But I don't need the heat for...

Hi, I have a new pool and spa which uses the EasyTouch 4, has the PV3 infloor system. When the floor system is on, it doesn't skim the pool well. When I turn off the floor and have it go tot he returns, it skims well (after adjusting the jets). Now what I'd like to do is put an actuator on...