Search results

I need to get in the water to scrub parts that the brush with the pole don't do much. I'll do the slam and do another OCLT ( the water has been clear all this time) I have to mention that about 3 weeks ago I had a leak they came to fix it and drained below waterline tiles and after that the...

I will try to gather some after the robot is done and try that. It was in the walls and bottom and in the water line it was looking green. I was thinking to slam and reading on it. I have to lower my ph and because my cya is 50( ideal cya for slam 30- 50 ) the app tells me to slam to 20ppm. So...

Test result last night. Did it twice with same results FC 5 CC 0.0 This morning did it several times with different results from FC 4 CC 0.5 FC 4.5 CC 0.5 FC 4.5 CC 0.0

Yes, it has the pleated filters and they pick up that yellow stuff too.

:LOL: will do

I've been testing frequently and it seems fine but I will do the test.

I makes a little cloud and dissipates.

Hi. Here again thinking like last year that I have algae??? I have yellow "stains" all over my pool but my numbers are good (I think) except ph that is always high. I had this problem last year but not nearly as bad as now and as far as I know it wasn't algae. Here I include some pictures and my...

My FC and Cc has been constant, no loss of FC. The gunk part was right at the waterline and some on top too where the water doesn't touch. Thank you for your input.

That could be what is raising my TA. I have filled my pool like 3 times in the last 2 months but the ph has been always high and the TA never was an issue. I will test my fill water, thank you.

No one using the pool at this time of the year. For it to be mold, mildew or algae would it show on the numbers in the test? For example on the FC and CC. I always thought that if something was happening I would notice it there on the cc?

Sorry I just realized I didn't answer your question. I've never tested my tap water, is that what you are referring to?

Thanks

(never adjust your pH by more than 0.4 points) Why?

I'm constantly( weekly average) lowering my ph for the past year that around this time the pool was done. I thought that with time the ph would normalize.

Here are my results FC 8.5 CC 0.0 TA 100 (already at 80 once I lowered my PH) CYA 40 PH 8.2 (lowered to 7.2) CH 250 Salt 3400 CSI -0.81 Temp 65 Ok, I have a couple of questions. I had to lower my ph 1- because it was high and 2- to lower my TA the was at 100 when normally is 70 for the last...

True. Thanks :)

Thanks, I'll keep this in mind :)

Yes, I’m so relieved.

We moved in January but I believe that the pool was done December. We have grass all around so dirt for us is not a problem.

I’m relieved, yesterday I was in panic mode. I’ll keep an eye on the chlorine. Thanks for everything, like always so diligent.

Yes, I disconnected it.

Just finished the test and both times the results were the same, 6ppm. I did it twice both times just to make sure. I noticed in my pool robot that the filters had yellow stuff ( pollen ? ) first time seeing that.

will do, thanks.

I think it just disappeared. I haven't seen more of it. I'm just so confused when all my numbers are good.

Ok I'll do that tonight and get back to you tomorrow. Thank you.

I went back to the pool and saw another one but smaller. My fc is good my cc is 0 and my water is clear. If I slam, until when?? because the numbers are good?