Search results

Need some advice. My pH is pretty stable at 7.6 but my TA wants to creep up from 80 to about 120 (right now). I've searched and read the posts online about how to increase pH without increasing TA, then bring both down with muriatic acid. I created adapters for two of my return jets to aerate...

I have a Pentair Intellichlor (IC-40) SWG that indicates under 4000 hrs used. Yesterday, the SWG stopped working - with the Cell light going RED after the two minute starting cycle. The last two times this happened (over the last 3 seasons), replacing the flow/temp switch corrected the issue...

I've been a Pentair guy for the last 10 years or so. However, I've had to replace two Pentair Sand Dollar filters in the last 3 years due to pinhole leaks that developed at the seam. Because Pentair seems to have only a 60-90 warranty if you install it yourself, neither was covered under...

I did a quick search which did not reveal the answer to my question. What is the best method/location to store a micro mesh safety cover over the summer so that nothing will get into it - like mice or ants? I bought a brand new cover two years ago. Last summer, I stored it in the mesh bag...

Need some expert advice. I've done some searching but not really found any good posts specific to this topic. What is the best valve application to use on the suction side - ball vs gate, brass vs PVC vs pentair/jandy? I currently have brass gate valves, but recently found one is sucking...

I need some advice. My local pool company contacted me and offered to do an energy audit on my pool equipment. The result? They recommended I upgrade to an IntelliFlo VS 3050 from my current single speed pump. They estimate in my area, I could save about $800 annually, by running the new...

I did some searching, but really didn't find an answer to my question. I'm trying to find out how well flexible PVC really stands up over time. When closing my pool this year, I ended up cracking one of the fittings on my suction line from the main drain and skimmers in my IG pool. I'm going...

I followed the Ascorbic Acid method for removing the staining in my pool, particularly on the steps and the skimmers. Everything cleaned up and was doing great. I was able to keep chlorine around the 3-5ppm target value for my pool and keep pH no higher than 7.2 for about 1.5 weeks. Last week...

I've done some searching on the forum, but not really finding answers to my questions. I just purchased my first safety cover (GLI ProMesh) and I'm getting ready to install it. Let me know your thoughts on the questions below. Should I drill the hole deep enough for the anchor (~ 2") or drill...

Our liner was replaced 5 years ago. Since that time, I've noticed wrinkles forming at the upper portion of the slope between shallow and deep ends. It seems as though it's getting worse. I've attached some pictures to show what I'm referring to... Is this something I should worry about or...

I've done some searching but only found that pool sample should be taken 12-18" under the surface. My question is where should it be taken? Should it also be taken in the same place each time? Thanks!

Got my TF-100 test kit today and performed my first tests, should have sprung for the magnetic stirrer. Still getting the hang of this, so not sure how accurate. Here's where I am: FC - 8 CC - 0.5 TC - 8.5 pH - 7.2 TA - 210 CYA - 70 CH - 590 Salt - 2900 Water is looking pretty good and clear...

I'm new to the forum and just want to say thanks already for all the advice I've received. I searched on this topic, but didn't really find what I was looking for. It's time for a new cover and I'm tired of messing with the standard winter cover, water bags, leaf net, etc... I'm located in...